FAQ – BottlePlus GmbH

FAQ

1. Make sure the CO2 cylinder is firmly screwed into the refilling station.
2. Press the spark bottle down firmly until you hear the CO2 flowing (a squeaking sound). When you hear the flowing sound, continue to press the bottle down firmly until the sound gradually weakens and then disappears. This takes about 10-15 seconds.
3. Then, lift the bottle vertically upwards from the refilling station.
1. Fill the bottle to the recommended fill level (where the curve of the bottle shoulder begins) and screw the lid on tightly until it is fully closed.
2. Hold the bottle upright and press the carboniser button firmly so you can hear the CO2 flowing into the bottle. Keep the button pressed until you hear the overpressure release, which sounds like a slight "blowing off." It takes 5-20 seconds for the overpressure release to activate, depending on how strongly you press the carboniser button.
3. Now shake the bottle vigorously to make the water sparklier.
4. Carefully open the lid, or if you want stronger sparkling water, you can press the button again.

Generally, yes, but when carbonating beverages other than water, foam will form. The intensity of foam formation varies depending on the beverage. After each use of the spark bottle with beverages other than water, it must be thoroughly cleaned, including the removal and cleaning of the sealing elements on the carboniser and bottle cap. Beverages with pieces/pulp or thick beverages should not be carbonated with the bottleplus system.

Using the spark bottle